✳ START WITH A CUBE✳ BUILD A WORLD✳ FIND YOUR STYLE✳ BRING IT TO LIFEIN THIS GUIDE
01 / THE OVERVIEW
ONE LITTLE PLANE. A WHOLE WORLD.
The idea is simple: make the motion in 3D, then give every shot the look of a 1990s cel-shaded anime.
Start with a low-poly Blender scene to plan the camera and movement. Make a pilot and biplane reference sheet, transform selected previs frames into finished scene images, then use the 3D clips to guide animation. Finish by assembling the shots into one journey.
01BUILDBlender previs
→
02DESIGNKrea 2 sheets
→
03STYLEImage editing
→
04ANIMATEMiniMax H3
02 / BUILD THE FOUNDATION
START SIMPLE. THINK IN SHOTS.
A simple 3D scene gives you the camera, timing and motion before you commit to the final look.
This project was built in Blender with ChatGPT and Blender MCP. Start with the default cube, build the biplane, then add meadows, lakes, pine forests, mountain ranges and cloud layers. Animate a steady flight and use different camera angles.
Build the plane. Block out the fuselage, stacked wings, tail, propeller and landing gear.
Make the world. Use simple low-poly shapes and broad colors to establish the terrain.
Plan the shots. Try top-down, telephoto side, rear follow and front three-quarter views.
Render and extract. Export the previs, split it at each camera cut and save one representative frame per shot.
READ & COPY THE COMPLETE BLENDER MCP PROMPT +
Use Blender and the connected Blender MCP to create a 15-second, square, low-poly 3D previs of a yellow vintage biplane flying continuously over a peaceful landscape. Build and animate the scene; do not stop after describing a plan. Work in a new scene or a new .blend file so existing work is preserved. Save the finished editable project and a rendered previs in the project folder.
OUTPUT AND LOOK
Set the output to 1080 × 1080 pixels, 24 fps, frames 1–360. Use clean, simple low-poly geometry, flat-shaded facets, bright pastel colors, warm daylight, soft shadows and a blue sky. This is a readable 3D motion and camera reference, not the final illustrated look. Keep the visual style consistent and minimalist.
AIRPLANE
Make a recognizable, compact yellow vintage biplane, centered around a single parent rig, facing forward along +Y. Build a tapered fuselage, two clearly separated stacked wings with struts and braces, a tailplane and upright fin, an open cockpit with a small windshield, a rounded engine cowling, a two-blade propeller and simple landing wheels. Give the wings a span around 5 Blender units and the body a length around 4 units. Use butter-yellow and warm ochre, with dark wheels and a brown cockpit. Animate the propeller spinning smoothly and continuously. Keep the plane’s wings level with only subtle periodic bobbing; its forward motion must not reverse or pause.
LANDSCAPE
Build an expansive low-poly meadow beneath the plane with gentle undulations, irregular turquoise lakes and light sandy shores. Add dense clusters of stylized pine trees and recognizable faceted mountain ridges with light snow caps along the distant horizons. Keep mountains out of the flight corridor and avoid giant disconnected shapes in the camera view. Add soft, low-poly white cloud banks at varying heights below the plane but above the terrain. Add a small flock of birds between the aircraft and landscape, with clean silhouettes and gently flapping wings. Use the same scene for every shot.
CONTINUOUS FLIGHT AND LOOP
Place the aircraft around Z = 9. To create sustained forward flight while the cameras track the plane, keep its rig near the center and animate a broad, repeating landscape moving continuously toward −Y. One approach is to build a 224-unit-long terrain tile, duplicate it with shared geometry at Y offsets of −224 and +224, and move the tile parent linearly from Y = 0 at frame 1 to Y = −224 at frame 361. Make the duplicate tile reproduce the starting view at frame 361. Extend the land beyond every camera view and hide visible seams with terrain design. Keep clouds and landscape features aligned with the tiles. Animate any independent bird or cloud movement so it does not visibly pop at the loop boundary. Make the plane’s bobbing and propeller rotation periodic as well. Render frames 1–360, using frame 361 only to check that the loop returns to the same state as frame 1 without a duplicated final frame.
CAMERA SHOT LIST
Use timeline markers and distinct cameras for these cuts. Keep the square composition throughout and show real forward motion in every shot.
• Frames 1–84: directly overhead, camera tracking the plane. The nose points to the TOP of the frame and the landscape moves toward the bottom. Clouds and, occasionally, birds pass underneath the plane.
• Frames 85–156: distant side profile using a strong telephoto lens, approximately 300 mm, with the airplane in focus. Place foreground trees between the camera and plane; animate a tree crossing the frame and use depth of field so it passes softly out of focus. Arrange the mountain backdrop behind the plane, not between the plane and camera.
• Frames 157–184: rear-follow shot from behind and slightly above, showing the aircraft, lakes and trees ahead.
• Frames 185–216: cockpit-style forward view over the landscape toward the horizon.
• Frames 217–249: closer three-quarter hero angle with the landscape and clouds below.
• Frames 250–276: front three-quarter view of the biplane approaching, with the pilot position readable.
• Frames 277–312: wider landscape reveal including the plane, lakes, forests and distant mountains.
• Frames 313–360: return to the opening overhead camera and continue the same forward motion so the sequence loops back into frame 1.
LIGHTING, CHECKS AND HANDOFF
Add a broad, soft sun and ambient sky lighting. Use a practical, efficient render setup and make a low-resolution preview first. Inspect representative frames from every camera for correct framing, plane visibility, landscape coverage, mountain placement and foreground depth of field. Verify that the plane points up in the first shot, the background always moves in the correct direction, the clouds and birds remain below the aircraft, and frame 361 matches frame 1. Set the final render back to 1080 × 1080 at 24 fps. Save the .blend and render the full previs; also export separate clips at each camera cut and one still frame from each shot for image-to-image reference. Report the saved file locations and any limitation you could not verify.
Paste this into ChatGPT or another Blender-capable assistant with Blender MCP connected. It is a reusable build brief; generated geometry and exact composition can vary, so inspect the preview and adjust as needed.
THE BUILD / BLENDERTHE DEFAULT CUBE IS THE STARTING POINT
03 / GET THE GRAPH READY
MEET YOUR CO-PILOTS.
First, design the pilot and the plane as separate sheets. Each one becomes a visual anchor for the shots that follow.
COMFYUI / TEXT TO IMAGE
KREA 2 TURBO
Drag the included JSON onto the ComfyUI canvas. The saved graph uses an EmptyLatentImage node, so it generates from text; it does not accept the character sheet or plane sheet as image references on its own.
BEFORE YOU QUEUE The supplied graph opens at 1920 × 1080. For these sheets, change the actual EmptyLatentImage dimensions to a landscape 3:2 ratio, such as 1536 × 1024, if your setup supports it. Select the model files installed on your machine; filenames may differ. Start smaller if memory is tight. The graph randomizes its seed. Krea 2 setup ↗
04 / CREATE YOUR REFERENCE SHEETS
CHARACTER. MEET MACHINE.
Generate each sheet separately. Look for clear silhouettes and consistent details before using them across the film.
01 / THE PILOT CHARACTER REFERENCE
KREA 2 / PILOT
THE PILOT.
A friendly, original cartoon aviator: leather helmet, goggles over the eyes and a yellow scarf. Ask for a three-quarter portrait plus matching full-body front and back views.
READ & COPY THE PROMPT +
Create a character reference sheet for an original, friendly adult biplane pilot for a stylized animated adventure. A charming 3D cartoon character with a warm smile, rounded features, small expressive eyes and simple sculpted dark hair. He wears a brown leather aviator helmet with brass-rimmed vintage flight goggles worn over his eyes, a brown leather flight jacket with a cream shearling collar, a golden yellow scarf, muted teal trousers, brown gloves and sturdy brown boots. Add a small wing-shaped badge.
Composition: one landscape 3:2 reference sheet on a warm ivory background. Left: a large three-quarter close-up portrait. Center: a complete full-body front view. Right: a complete full-body back view. Front and back figures are the same scale, standing naturally with hands and boots entirely visible.
Use appealing 3D animated-film proportions, softly rounded forms, tactile but restrained material details, warm studio light and a cheerful pastel palette. Keep the same character, helmet, goggles, outfit, colors and proportions in all three views. No extra people, text, labels, watermarks or cropped feet.
02 / THE BIPLANE OBJECT REFERENCE
KREA 2 / AIRCRAFT
THE BIPLANE.
Give the plane an identity you can recognize from any angle: yellow wings, a red-orange cowling, a blue stripe and a collection of small travel decals.
READ & COPY THE PROMPT +
Create an object reference sheet for one characterful yellow vintage biplane in a bright, whimsical animated-adventure world. A compact 1930s open-cockpit aircraft with two clearly separated stacked wings, wing struts, rounded red-orange radial-engine cowling, wooden propeller, landing wheels and a small tail wheel. Butter-yellow fuselage and wings, cream wing tips, a sky-blue swooping stripe, a smiling sun emblem, small mountain, cloud and lake travel decals, and a stitched canvas repair patch. Add subtle sun-faded paint and light, believable wear.
Composition: one landscape 3:2 reference sheet on a warm ivory studio background. Include one large three-quarter hero view and smaller clear top, side, front and rear views of the SAME plane. Add a few close-up material and decal details. Keep complete silhouettes visible and allow space between views.
Premium stylized 3D animation design, simple readable forms, tactile painted metal, fabric and wood, soft studio light and a warm pastel palette. Preserve the same wing arrangement, colors, markings, cockpit and proportions in every view. No people, scenery, text, labels or watermark.
APPROVE THE DETAILS Check the number of wings, the pilot’s goggles and the placement of markings in each view. Generators can vary details between panels; regenerate or edit until you have a sheet you want to use as the authority.
05 / FROM PREVIS TO PAINT
SAME SHOT. NEW WORLD.
The 3D frames are your composition guide. The finished stills translate those angles into a 1990s cel-shaded world. Drag the handle to compare.
The comparison crops align the aircraft as closely as possible. Because the generated images reinterpret the plane and its perspective, some wing and fuselage details will differ.
PROJECT DOWNLOADS
TAKE THE SHOTS. MAKE THEM YOURS.
Download the original previs clips and the generated anime scene images used in this project.
THE COMPLETE SHOT PACK
ALL THE SHOTS, ONE DOWNLOAD.
Eight Blender previs video clips and seven generated scene images, organized in two folders. The eighth clip returns to the overhead view.
The individual files and the ZIP contain the original assets, not the cropped comparison previews. The previs clips are MKV videos; the scene images are PNG files.
06 / MAKE THE SCENE IMAGES
THREE REFERENCES. ONE SHOT.
Bring the 3D composition, the plane and the pilot together in an image editor that accepts multiple visual references.
Choose a previs screenshot. Use it to establish the angle, framing, flight direction and placement.
Add the biplane sheet. Use it for the aircraft silhouette, colors, decals and markings.
Add the pilot sheet. Use it for the helmet, goggles, clothing and character identity.
Generate and refine. Keep the scene square. Inspect wings, goggles, direction and cockpit placement; make focused edits to fix individual problems.
Use ChatGPT, Gemini or a ComfyUI image-edit workflow that supports the references you want to use. Some workflows accept only one image at a time; in that case, build the shot in stages or use a compatible multi-reference editor. If using a Wan-based image-edit workflow, check that its specific nodes and model support still-image editing and your reference inputs; Wan video workflows have different inputs.
READ & COPY THE SCENE PROMPT +
Use Image 1 as the composition and camera reference: match the 3D screenshot’s camera angle, square crop, aircraft position, scale and direction of travel. Use Image 2 as the identity reference for the yellow biplane, including its two stacked wings, orange-red cowling, cream tips, blue stripe, sun emblem and travel decals. Use Image 3 as the identity reference for the pilot: brown leather aviator helmet, goggles over his eyes, brown jacket, cream collar and yellow scarf.
Create one continuous cinematic scene image in a 1990s cel-shaded anime style. Translate the simple 3D terrain into a hand-painted landscape of green meadows, pine forests, blue lakes and distant mountains, with soft clouds and warm daylight. Keep the plane’s original heading and the reference shot’s perspective. Seat the pilot naturally inside the cockpit, facing forward, at a believable scale and correctly occluded by the cockpit rim and wings. Preserve the exact aircraft identity, markings and wing arrangement. Use clean inked outlines, restrained cel shading and gentle painted texture. One square image; no collage, text, logos, duplicated planes, extra limbs or distorted faces.
Upload in the order named by the prompt, or update the image numbers to match your tool. The image-edit model may reinterpret landscape details; compare each result with the previs and sheets.
IMAGE 01 / COMPOSITION
IMAGE 02 / AIRCRAFT
IMAGE 03 / PILOT
↓
ONE FINISHED SCENE IMAGE ✳
07 / MAKE IT MOVE
THE STILL TAKES FLIGHT.
Pair the finished scene still with its corresponding 3D video clip to guide the movement and camera.
01SCENE IMAGEVisual style + design
→
023D SHOTMotion + camera
→
03H3 REF2VIDEOOne animated shot
Load the pair. Use the AI scene still as Image 1 and its matching 3D shot as Video 1.
Give each input a job. Ask the image to guide appearance and the video to guide motion, camera and speed.
Describe movement. State the flight direction, camera relationship, depth of field and motion blur. Keep each shot continuous.
Review and edit. Check the pilot, propeller, wings and background from the first frame to the last. Trim and assemble your preferred takes.
OUTPUT SETTINGS Choose 1:1 in your video workflow. The example MiniMax H3 guide describes 5–15 second outputs; your node or model may differ. A shorter 3D clip can serve as a motion reference where supported, and a longer output can be trimmed. Read the H3 guide ↗
REFERENCE / EXAMPLE WORKFLOW GRAPH NODE DETAILS DEPEND ON YOUR INSTALL
READ & COPY THE REAR-FOLLOW ANIMATION PROMPT +
1990s cel-shaded anime, animated at 15 fps, with crisp cel outlines, hand-painted backgrounds and warm daylight. Use Image 1 for the visual style, biplane, pilot, landscape, composition and shallow depth of field. Use Video 1 for the forward flight, following-camera movement, speed and landscape parallax.
One continuous square rear-following shot. The camera tracks smoothly behind and slightly above the yellow vintage biplane as it flies steadily toward the distant mountains. Keep the aircraft centered at a consistent size, tail nearest the viewer, nose facing the horizon. Meadows, pine forests and blue lakes flow backward beneath it. The helmeted pilot remains seated, facing forward; his yellow scarf flutters gently. The propeller spins with translucent rotational blur.
Keep the plane and pilot sharp. Sustain visible directional motion blur on passing terrain throughout the entire shot, strongest on nearby ground and trees and weaker in the distance. New scenery inherits the same blur as it enters the frame. Keep flight speed and focus consistent from first frame to last. Maintain stable wings, markings, cel outlines, colors and painted textures. No cuts, camera orbit, sudden banking, reversed flight, morphing aircraft or blur fading away.
Audio: steady vintage propeller-engine hum and gentle rushing wind. No dialogue or music.
08 / THE FINAL PASS
THE JOY IS IN THE DETAILS ✳
MAKE IT YOURS. THEN LET IT FLY.
Render a few variations, check continuity from shot to shot and keep the takes that feel right. Assemble them in your editor, trim the transitions and add sound or music.